Instructions for Using Semi - auto Flute Laminating Machine

Operating the Semi-auto Flute Laminating Machine. Mastering the correct procedures and key points is crucial. This instruction covers preparation, operation and precautions to help you use the equipment efficiently.

I. Equipment Preparation
Site & Space：Put the machine in a stable, dry, and well - ventilated place. Leave at least 1 - 2 meters of space around for easy operation and material handling.
Power Connection：Verify the power supply voltage matches the machine's requirement (usually [specific voltage value] volts). Connect with a proper power cord and check for any loose connections.
Material Prep：Prepare flat, undamaged corrugated and facing paper, cut to the right size. Stack them near the feed inlet. Select and prepare the suitable glue according to paper materials.

II. Operating Procedures
Power - on：Press the power switch on the control panel. After the self - check with no alarms, the machine enters standby.
Parameter Setting：Adjust lamination pressure (e.g., [X] - [X] units for thin paper, [X] - [X] for thick paper) and glue amount based on paper thickness, material, and lamination needs.
Loading：Align the facing paper at the feed inlet, then place the corrugated paper on top, ensuring proper alignment.
Start Lamination：Press "Start" to begin. The rollers move the paper, apply glue evenly, and complete lamination through squeezing.
Finished - product Collection：Collect and stack the laminated cardboard from the discharge port for later processing.

III. Precautions
Safety：Wear gloves and goggles during operation to avoid glue splashes and moving - part injuries.
Cleaning：Regularly clean the rollers, glue pipes, and feed device when the Semi-auto Flute Laminating Machine is off. Wipe roller glue residue to maintain lamination quality.
Fault Handling：If there are abnormal noises, jams, or quality issues, stop the machine, cut power, check for loose parts, and glue supply. Call a professional if needed.